Car Nitrous Injection System (NOS Kit)

You do not need a V8 to fit Nitrous Oxide Injection. So lets carry on...!!

ANY ALL ENGINES,from lawnmowers (been there while testing) and model aircraft engines, up to big diesel marine engines, supercharged, turbocharged, or naturally aspirated can all be boosted with Nitrous Oxide quite safely. Fuel injected, or Carburettor. It makes absolutely no difference. All will work just fine with Nitrous Oxide as a power booster. Only a few small differences between each system are required.

1. 1. A bottle or "tank" to store Nitrous Oxide
2. 2. A valve for this bottle
3. 3. A special fitting that fits this bottle valve and converts to a normal 1/8th BSP thread (British standard pipe thread)
4. 4. A braided Stainless steel Nitrous Pipe to feed the Solenoid in the engine bay
5. 5. A Nitrous Solenoid!
6. 6. A Fuel Solenoid!
7. 7. A Tee piece or other means of supplying fuel to the Fuel Solenoid - depends on vehicle
8. 8. A Jet Holder for the Nitrous jet. (1/8th BSP to 4mm O/D Nylon with nut and olive)
9. 9. A Jet Holder for the Fuel Jet. (1/8th BSP to 4mm O/D Nylon with nut and olive)
   10. Some 4mm O/D Nylon pipe to connect the solenoids to the point of injection
10. 11. Nitrous/Fuel Injector - or occasionally more than 1 depending on engine configuration
11. 12. Assorted brackets and mounting hardware, cable ties, grommets, wiring etc
12. 13. An arming switch
13. 14. Throttle operated Micro-Switch or other alternative

for full detail just click on the pic above......